Druid 24 LCD is a two zones electric fencing system energizer. The central unit generates a 9,7 kV pulse in every second, and offers 2x2J non-lethal output energy to shock everyone who touch the wires. That will deter or stop an intruder. Both of the high voltage and low voltage wires are monitored againts cutting or tamper. Adaptive power technology offer a new and unique method in detecting how much power a fence can accept and handle before it starts to arc and waste energy, thus maximising the power on the fence. Two keypads can be added to remotely control the energizer from a maximum 100 meters distance, but available an input to on/off remotely. The energizer also has a gate monitor input which can be used to monitor the position of the gate, and two outputs for strobe and siren and strobe light. Druid 24 has an internal battery backup system in case of power failure, which provides a 24h working period without power from the mains. Optimal wire lenght is 2x6 km. A four zone system can be created by connecting two Druid 24 together on a communication bus. For more details and prices please contact us here!

Wall top bracket stays are made to complement the bracket range. They offer a sturdy construction and support for the brackets on the corners and at the end of a fence. The wall top brackets stays have the following features:

• • Lenght: 750mm
• • Diameter: 8mm
• • Hot dip galvanized or powder coated finish
• • Available in black

2 zones LCD keypad for Druid 24 energizer. It is used to program and control the energizers. Maximum lenght of communication bus between the energizer and the keypad can be 100 meters.

RS485 communication card allow energizers that are located far apart to communicate with each other and the system. Both Fiber optic card and the RS485 cards can be installed inside the Druid 24 energizer housing and are powered by the electric fence energizer. Fiber Optic cards are the preferred option and must be used in high lightning areas.

The flat bar insulator is used with the flat bar profile posts to hold the wire on inner post or hook with a tensioner. The flat bar insulators have the following features:

• •Quick fit clips on the top and bottom for faster installation
• •Feed through clip option built in
• •Easy to change and maintain
• •Available in black

Aluminium stranded wire - 2.0 mm The Nemtek stranded wires are made of high tensile material making them hard to cut thus increasing the level of security. The flexibility offered by the stranded wire construction makes working with this wire easier during installation and results in a neat clean look on the fence without compromising the fences performance. The aluminium stranded wire have the following features:

• • Diameter: 2.0 mm
• • Resistance: 18 Ohms/km
• • Unit: 1000 m

Piggyback bracket - 17 wires Nemtek offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top brackets have the following features:

• • Squaretube
• • Straight
• • 17 wires
• • Hot dip galvanized or powder coated finish
• • 2500 mm long
• • Flat bar insulator
• • Available in black

Alarm cables are used with alarm systems, intercoms and to connect the keypad to the energiser. The alarm cables has the following features:

• •Stranded
• •4 cores
• •PVC sleeve
• •Indoor use
• •Unit: 100m

The earth cable is used to earth the electric fence system with earth spikes to operate effectively. Knock 3 earth spikes into the ground near the electric fence at a minimum of 1.5 m apart and connect these earth spikes to the energizer using the earth cable or high tension cable. Even a powerful energizer will not be effective without good earthing. In areas where earthing conditions are bad you may be required to add a few more earth spikes along the fence line and connect these back to the energiser. The earth cable has the following features:

• •Diameter: 2,5mm
• •Unit: 50m

• •Nominal Voltage: 12V
• •Nominal Capacity: 7 Ah
• •Type: sealed rechargeable battery
• •Weight: 2.15 kg
• •Dimensions: 151 x 65 x 95

Druid 25 LCD is a two zones electric fencing system energizer. The central unit generates a 9,7 kV pulse in every second, and offers 2x2,5J non-lethal output energy to shock everyone who touch the wires. That will deter or stop an intruder. Both of the high voltage and low voltage wires are monitored againts cutting or tamper. Adaptive power technology offer a new and unique method in detecting how much power a fence can accept and handle before it starts to arc and waste energy, thus maximising the power on the fence. Two keypads can be added to remotely control the energizer from a maximum 100 meters distance, but available an input to on/off remotely. The energizer also has a gate monitor input which can be used to monitor the position of the gate, and two outputs for strobe and siren and strobe light. Druid 25 has an internal battery backup system in case of power failure, which provides a 24h working period without power from the mains. Optimal wire lenght is 2x7 km. A four zone system can be created by connecting two Druid 25 together on a communication bus. For more details and prices please contact us here!

Stainless steel gate contact for smaller swinging gates.

A plastic yellow plate functions to give a warning about high voltage. Warning signs must be placed at 10m intervals along the fence, at gate ways or whenever there is a change of direction.

The earth spike is used to earth the electric fence system to operate effectively. Knock 3 earth spikes into the ground near the electric fence at a minimum of 1.5 m apart and connect these earth spikes to the energizer using the high tension insulated cable. Even a powerful energizer will not be effective without good earthing. In areas where earthing conditions are bad you may be required to add a few more earth spikes along the fence line and connect these back to the energiser. The earth spike has the following features:

• •Lenght: 120cm
• •Diameter: 10mm
• •Copper clad coating

Wall top bracket - 6 wire - T-pole Nemtek offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top bracket have the following features:

• • Flat bar
• • T-pole
• • 6 wires
• • Hot dip galvanized or powder coated finish
• • 600 mm long
• • Nail on insulator
• • Available in black

Wall top bracket - 6 wire - angled Nemtek offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top brackets have the following features:

• • Squaretube
• • Angled
• • 6 wires
• • Hot dip galvanized or powder coated finish
• • 995 mm long
• • Flat bar insulator
• • Available in black

The hybrid nylon tensioners offer what the compression spring and the mini nylon titan have to offer in one easy to use system. These tensioners offer the following features:

• •Combination of a compression spring to compress and expand as required and
• •A mini titan to tension any slack that has been created over time
• •Nylon plastic inner which eliminates galvanic reaction between dissimilar metal thus reducing rust and  increasing the life of the wire
• •Heavy tension (gold) spring can tension up to 2.0 mm wires.

The SENTIR-M20 is a 2D portable long-range ground radar capable of performing surveillance, vigilance, acquisition, classification, localization, tracking and automatic graphic display of targets on land or air, such as troops, tanks, trucks, trains and helicopters. The SENTIR-M20 operates in all weather conditions and has the power to detect a man in motion at a distance of up to 10 km. For lightweight and heavy vehicles the range is approximately 20 to 30 km. The SENTIR-M20 may be supplied with a support for the installation of cameras in the visible and infrared spectre or even be adapted for use in vehicles or towers. The radar stands out for its robustness, reliability and portability. It excels at border surveillance and protection of sensitive areas of national infrastructure, providing informations for detection of possible threats.

The nail on insulators are screwed onto metal brackets or wooden posts to drive the wire on the corners. The nail on insulators have the following features:

• •Large clips for heavy duty applications
• •Larger clearance to eliminate power leakage
• •Available in black

Wall top corner bracket - 6 wire - T-pole Nemtek offers a large range of brackets to suit most wall types and applications to protect against climbing over. They are made mainly from steel and are finished in a high quality coating of outdoor powder, or hot dip galvanised for coastal conditions. The wall top bracket have the following features:

• • Flat bar
• • T-pole
• • 6 wires
• • Hot dip galvanized or powder coated finish
• • 600 mm long
• • Nail on insulator
• • Available in black

The Fence Scope Multi Tool is a 4 in 1 tool, which helps diagnose problems on your fence to optimize electric fence installation and ensure that the fence continues to operate at ideal levels. There are four operation modes to select from: Fence Probe mode –quickly indicates the direction of a fence fault, showing the voltage and current Fence energy mode- accurately measures the output energy along the fence. This mode can be used to test the size of the shock the human or animal will receive at any point along the fence by simulating them. This helps to ensure that the voltage and the energy is sufficient along the entire fence to deliver an adequate shock. Fence scope mode –this can record and display wave forms of the electric fence pulse. Distortions in the wave form (wave shape ) generally indicate that there are fence faults. Fence noise mode –this shows the amount of electromagnetic interference generated by the fence or energizer. This feature assists in finding cracked or broken insulators, sparks and shorts along the fence. The Fence Scope has the following features:

• •Large graphic display with resolution of 128x64 picture elements
• •Audio tone frequency output varies depending on the voltage for quick measurement
• •Simple five key user interface
• •Designed for use up to 16KV