PRT is a programming rugged tablet with preinstalled android application for the setup of Predix microwave barriers. This android tablet with a  7" wide display makes the adjustment and fine tuning much more easier and comfortable on the installation site. The tablet has a water and dustproof casing, which makes it applicable even in harsh weather conditions. The package contains an OTG cable, which is needed between the programming tablet and the RS485/USB converter.

Radon-100 MRS is a dual-position microwave detector, which can be used for outdoor or perimeter protection. The microwave barrier operates at X-Band (10.525 GHz) frequency. The installation and setting of the barrier is quite simply. 4 different frequency modulated channels can be set to avoid interference caused by microwave reflection. Configuration can be done with the aid of a multimeter. Radon is able to optimize automatically all the working parameters properly to the environment conditions (snow, rain, etc.). Minimum and maximum range is between 40 – 100 meters, and the maximum width of detection zone is around 2,5 meters. The barrier has a very wide operating temperature range of -40°C - +65°C, and completely efficient even in very bad weather conditions. A junction box and aluminium brackets also included to the sensors.

For more details and prices please contact us here!

DC cable is a special signal transmitter cable. It is capable to extend the starting point of the TB sensor cable with up to 500 m. Unit: 100m

For more details and prices please contact us here!

Nomad-24 is the portable, fast deployable version of the Predix microwave barrier. This digital microwave barrier, which operates on K-band frequency, can be an ideal solution for creating temporary area protection around military vehicles, military camps, construction sites, mobile platforms. The Nomad-24 set consist of a microwave barrier (transmitter and receiver unit) plus a control unit, among which a radio transmission system provides the constant communication. In standard operation the devices are powered from their own batteries, but there is a possibility to connect power via cables. The maximum distance between the transmitter and receiver unit of the microwave barrier can be 200 m. The signal transmission module, which is built in the receiver unit, can send the alarms to the control unit from a maximum 1000 m distance (with directional antenna the range can be extended to 10 km). The control unit can supervise 1 pair microwave barrier. Beside the normal alarms, we can receive tamper alarm and information about the battery statuses in case of low voltage. Thanks to the K-band microwave emission, the detection zone of the device is much narrower, than the X-band microwave sensors, hence it requires smaller clear area. Because of the innovative digital signal processing algorithm and the 250 different frequency channels, the possibility of false alarms caused by interference between multiple detectors on one site in nearly zero. Due to the narrow detection zone (1,6 m at the longest 200 m range), wide range of settable operating frequencies and the accurate signal processing, the barrier can be deployed in a variety of configurations. Nomad-24 is expressly designed to work in all weather conditions with continuous round-the-clock operation. The barrier has a wide operating temperature range of -20 °C – +40 °C, and continues to function efficiently even in conditions of rain (up to 40 mm/hour) or wind (up to 30 m/s).

The microwave barrier can be set via RS-485 protocol by a PC with the free setup software or by an android app on tablet.

For more details and prices please contact us here!

Out of production

         

Junction tube. Applicable to connect TB and DC cables or TB cables and End line units. Portection: IP68

Radon-200 MRS is a dual-position microwave detector, which can be used for outdoor or perimeter protection. The microwave barrier operates at X-Band (10.525 GHz) frequency. The installation and setting of the barrier is quite simply. 4 different frequency modulated channels can be set to avoid interference caused by microwave reflection. Configuration can be done with the aid of a multimeter. Radon is able to optimize automatically all the working parameters properly to the environment conditions (snow, rain, etc.). Minimum and maximum range is between 80 – 200 meters, and the maximum width of detection zone is around 3,5 meters. The barrier has a very wide operating temperature range of -40°C - +65°C, and completely efficient even in very bad weather conditions. A junction box and aluminium brackets also included to the sensors.

For more details and prices please contact us here!

TB cable is the other main part of the Quadrosense fence protection system. This sensor cable is a special Triboelectric cable, which detects the vibration of the fence caused by an intruder. Unit: 250m

For more details and prices please contact us here!